Receiver 2048 codes with rolling code and built-in programming display. Each exit ( max. 4) can be configured in an impulse, bi-stable, timer or anti-aggression mode. The connection of the remote control units can be performed manually, via radio and in blocks of 100 using the PROXIMA programmer. Access to the programming mode can be protected by a password. Power supply 230 Vac 50Hz.

Four-channel rolling-code receiver. 128 codes. The outputs, with insulated relays, allow direct connection of loads up to max 16A (operators, lights, garden irrigation etc.). It is possible to replace or add transmitters in the receiver memory by means of the cloning process by radio. Cloning is possible with Mitto transmitters. Possible connection with Compass Slim and Seletto. Possible configuration of each single output operation in impulse, bistable or timed mode (by selecting a time from 30s to 12h by means of a dip switch). Box with IP55 degree of protection, Power supply 230 Vac 50Hz.

External two-channel receiver with 128 rolling codes. Using the cloning process by radio it is possible to replace or add transmitters to the receiver memory. Cloning is possible with MITTO transmitters.

Two-channel receiver with 2048 rolling codes. Using the cloning process by radio it is possible to replace or add transmitters to the receiver memory. Cloning is possible with MITTO transmitters.

Two-channel receiver with 128 rolling codes. Using the cloning process by radio it is possible to replace or add transmitters to the receiver memory. Cloning is possible with MITTO transmitters.