New-generation universal handheld programmer. This permits interaction with clonable-algorithm receivers and transmitters and with control units compatible with the EELINK protocol. Possibility of memorizing different lists of receivers. Simplified parameter management. USB interface for connection to the PC.

• Control panel suitable for an electromechanical motor for shutters up to 350W.
• Easy use thanks to the incorporated receiver, automatic or manual 4-step logics.
• Safety thanks to the built in receiver handling rolling code transmitters, separate buttons.
• Complete with separate inputs for the OPEN, CLOSE, STOP and PHOTOCELL controls.
• Total control of operation thanks to LED autodiagnosis.
• Easy setting by simple dip switches for enabling the various functions. Available while stock last.

• Control panel adaptable for motors of the STOPPY series, can command up to four bollards.
• Easy use thanks to the simple functions usable.
• Safety thanks to inputs dedicated to safety circuits and dedicated commands.
• Complete with operating logics in a centralised environment.
• Total control of operation thanks to adjustment of the operating logics.
• Easy setting by simple dip switches for enabling the various functions. Not suitable for STOPPY H motors Available while stock last.

• Ideal control panel for a motor of the ULISSE single-phase and three-phase series.
• Easy to wire thanks to extractable terminals and AUTODIAGNOSIS function with LED.
• Safety guaranteed by lockable circuit breaker, start-stop buttons, and emergency stop button.
• Complete automatic, semiautomatic and hold-to-run operating logics.
• Analogue programming for all the operating parameters and the operating logic. Available while stock last

Circuit board for direct connection of wiegand accessories (such as SELETTO, COMPAS SLIM, etc) to the control units QSC D MA, LIBRA C MA, LIBRA C MV, LIBRA C LX, VENERE D, LEO D MA, LEO MV, RIGEL 5 and ALTAIR P.

Gate open indicator board for ALCOR N (operation with limit switch).

• Control panel suitable for an electromechanical motor for roller shutters.
• Easy use thanks to the simple functions usable and incorporated receiver.
• Safety thanks to the built in receiver handling rolling code transmitters, separate buttons, anemometer, twilight sensor.
• Complete with operating logics in a centralised environment with multi-level master up to eight zones.
• Total control of operation (step-by-step by button or transmitter, zone closure from master, total control from Master 0).
• Easy setting by simple dip switches for enabling the various functions. Available while stock last.

• Control panel suitable for an electromechanical motor for roller shutters without receivers.
• Easy use thanks to the simple functions usable.
• Safety thanks to the single wire or centralised commands and to the management of separate buttons, anemometer and twilight sensor.
• Complete with operating logics in a centralised environment with multi-level master up to eight zones.
• Total control of operation (step-by-step by button, zone closure from master, total control from Master 0).
• Easy setting by simple dip switches for enabling the various functions. Available while stock last.

Serial cable for Proxima-PC connections.

• Ideal control panel for one or two motors up to 230V/0.5 HP of the swing type.
• Easy wiring thanks to extractable terminals blocks.
• Safety thanks to the AUTODIAGNOSIS function with LEDs for detecting faults.
• Complete with incorporated two-channel receiver and pedestrian management.
• Programming upgraded with the following functions: locked shut maintenance, 3/4 step logic, pedestrian closure, separate opening/closing.
• Easy use with previous systems thanks to total compatibility with ALCOR SD.

• Universal control panel for one or two motors up to 230V/0.5 HP of the electromechanical swing type.
• Easy wiring also for centralized connections, thanks to the extractable terminal blocks and the AUTODIAGNOSTICS function.
• Security thanks to motor torque control, regulation of the working time for pedestrians and locked shut maintenance.
• Complete with incorporated 2-channel receiver and input for pedestrian opening.
• Total control of programming by digital display.
• Easy setting by means of three simple buttons for programming logic and parameters. Easy to use on pre-existing systems thanks to total compatibility with ALTAIR.

• Ideal control panel for one or one motorup to 230V/0.5 HP of the sliding, swing and shutter type.
• Easy wiring thanks to extractable terminals blocks. • Safety thanks to the AUTODIAGNOSIS function with LEDs for detecting faults.
• Complete with integrated two-channel receiver, pedestrian management, can manage a second snap-in receiver with advanced function.
• Analogue programming for the operating parameters and digital for managing the radio system.
• Easy use with previous systems thanks to total compatibility with MIZAR.

• Ideal control panel for a motor of the ULISSE single-phase series.
• Easy to wire thanks to extractable terminals and AUTODIAGNOSIS function with LED.
• Safety guaranteed by lockable circuit breaker, start-stop buttons, and emergency stop button.
• Complete with integrated two-channel receiver and gate open indicator lamp, can manage a second snap-in receiver with advanced function.
• Analogue programming for the operating parameters and digital for managing the radio system.
• Easy use with previous systems thanks to total compatibility with MIZAR FR.

• Control unit suitable for an electromechanical motor for roller shutters up to 470W.
• Flexible and practical to use thanks to the multiple operating logic
• Safety ensured by the incorporated receiver managing up to 64 rolling code radio commands, separate pushbuttons.
• Complete with separate inputs for the START, OPEN, CLOSE, STOP, PHOTOCELLS, WIND SENSOR and TWILIGHT sensor commands.
• Easy to set using the dip switch to enable the various functions.

• Control unit with incorporated command button, suitable for an electromechanical motor for roller shutters up to 470W with command button.
• Flexible and practical to use thanks to the multiple operating logic
• Safety ensured by the incorporated receiver managing up to 64 rolling code radio commands, separate pushbuttons.
• Complete with separate inputs for the START, OPEN, CLOSE, STOP, PHOTOCELLS, WIND SENSOR and TWILIGHT sensor commands.
• Easy to set using the dip switch to enable the various functions.

• Ideal control unit for a ULISSE single-phase series motor.
• Safety guaranteed by Open-Close buttons and emergency stop button.
• Complete with automatic operating logic and semi-automatic when manned.

• Ideal control unit for a ULISSE three-phase series motor.
• Safety guaranteed by Open-Close buttons and emergency stop button.
• Complete with automatic operating logic and semi-automatic when manned.

• Panel suitable for one or two 24V (40+40W) motors for overhead doors.
• Easy use even in the event of power failure with back-up battery and AUTODIAGNOSIS for detecting faults.
• Safety thanks to: electronic motor torque limitation, settable slowdown.
• Complete with incorporated two-channel receiver, ready for serial management, back-up batteries and electric lock.
• Total control of programming by digital display and three simple buttons.
• Easy setting using the AUTOSET function which allows automatic setting of the operating parameters.

• Control panel for managing a single-phase electromechanical actuator with power of up to 750 W. – Electronic torque adjustment.
• Adjustable electrodynamic braking
• Programming by means of display.
• Self-diagnosis function.
• detection and memorisation of statistical parameters.
• Possibility of managing centralised systems by wire (master/slave system) up to 127 zones.
• 63 code receiver with built-in rolling code.
• Extractable terminals to facilitate installation and any servicing or replacement.

• Universal control panel for one or two 24V motors with limit switch with 1 or 2 wires.
• Easy to wire also for centralised connections, thanks to extractable terminals, and the AUTODIAGNOSIS function.
• Safety thanks to electronic antisquashing control with amperometric detection.
• Complete with incorporated two-channel receiver, ready for serial management, back-up battery and electric lock.
• Total control of programming by digital display and three simple buttons.
• Easy setting using the AUTOSET function which allows automatic setting of the operating parameters.

• Universal control panel for one or two series LUX BT motors
• Slowing on opening and closing managed by an absolute encoder which, combined with the amperometric detection ensures maximum anti-crushing safety.
• Complete with incorporated two-channel receiver, predisposed for serial management, back-up battery and electric lock.
• Full control of programming by means of the digital display and three simple buttons.
• Extremely simple to install and service thanks to the SELF-DIAGNOSIS (automatic detection of failures), and AUTOSET (automatic setting of the operating parameters) functions and the extractable terminals.
• Compatible with EeLink protocol, can therefore be programmed using Proxima.

• Control panel adaptable for motors of the STOPPY series, can command up to four bollards.
• Easy use thanks to the simple functions usable.
• Safety thanks to inputs dedicated to safety circuits and dedicated commands.
• Complete with operating logics in a centralised environment.
• Total control of operation thanks to adjustment of the operating logics.
• Easy setting by simple dip switches for enabling the various functions. Suitable for STOPPY and STOPPY H motors.

• Universal control panel suitable for one or two 600W/230V motors (max 600+600W).
• Easy to wire also for centralised connections thanks to extractable terminals and the AUTODIAGNOSIS function.
• Safety thanks to control of braking and the motor torque.
• Complete with extractable 2-channel receiver, ready for fast coupling to receivers with greater capacity and advanced functions.
• Total control of programming by digital display and three simple buttons.

• Ideal control panel for a motor of the ULISSE single-phase and three-phase series.
• Easy to wire thanks to extractable terminals and AUTODIAGNOSIS function with LED.
• Open, Stop and Close buttons
• Complete automatic, semiautomatic and hold-to-run operating logics.
• Analogue programming for all the operating parameters and the operating logic.